Messages Reference Guide

Recommended
Response Action
Verify that the disk is healthy and that it has not been removed. Check the cables. See the
Cables Attached Correctly section for more information on checking the cables. If necessary,
replace the disk and reassign the dedicated hot spare.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR101
Message Global Hot Spare
arg1 does not cover all arrays.
Arguments
•
arg1 =
PD Name
Detailed
Description
This alert message occurs if there are arrays not protected with a global hot spare.
Recommended
Response Action
No response action is required.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR9000
Message Foreign Configuration was detected on
arg1 .
Arguments
•
arg1 =
physical disk
476