Messages Reference Guide

Trap/EventID 4347
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR94
Message Microcode update on
arg1 has timed out.
Arguments
•
arg1 =
physical disk
Detailed
Description
The attempt to update the physical disk has timed out. This may be due to too much activity on
the bus, a bad update package, or a bad disk.
Recommended
Response Action
Retry the update. The update utility may have already performed the retry operation.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 3 (Informational)
Trap/EventID 4347
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR95
Message Microcode update on
arg1 has failed.
Arguments
•
arg1 =
physical disk
Detailed
Description
The attempt to update the physical disk has failed. This is due to too much activity on the bus, a
bad update package, or a bad disk.
Recommended
Response Action
Retry the update. If the update fails a second time, verify the update package is valid. If the
update package is valid, replace the failing disk. Contact technical support if the problem
persists.
Category Storage
473