Messages Reference Guide

Detailed
Description
This message is generated after a disk media error is corrected on a physical disk.
Recommended
Response Action
No response action is required.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 3 (Informational)
Trap/EventID 4347
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR55
Message Insufficient space available on the
arg1 to perform a rebuild.
Arguments
• arg1 = physical disk
Detailed
Description
The physical disk inserted is too small for the rebuild to occur.
Recommended
Response Action
Replace the physical disk with one of correct protocol (SAS, SATA) with at least the required
size. Force rebuild if it does not start automatically.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR56
Message Bad block table on
arg1 is 80% full.
Arguments
•
arg1 =
physical disk
455