Messages Reference Guide

ManualsBrandsDell ManualsComputersChassis Management Controller Version 1.0 for PowerEdge VRTX

421

422

423

424

425

426

427

428

429

430

SubCategory PDR = Physical Disk

Severity Severity 3 (Informational)

Trap/EventID 4347

LCD Message No LCD message display defined.

Initial Default. SNMP Alert;#LCD;#Remote System Log

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE

PDR5

Message

arg1

is removed.

Arguments

•

arg1 =

PD Name

Detailed

Description

A physical disk has been removed from the disk group. This alert can also be caused by loose

or defective cables or by problems with the enclosure.

Recommended

Response Action

Do one of the following: 1) If a physical disk was removed from the disk group, either replace

the disk or restore the original disk. Identify the disk that was removed by locating the disk that

has a red "X" for its status. 2) Perform a rescan after replacing or restoring the disk. 3) If a disk

was not removed from the disk group, then check for cable problems. Refer to product

documentation for more information on checking the cables. 4) Make sure that the enclosure is

powered on. 5) If the problem persists, check the enclosure documentation for further

diagnostic information.

Category Storage