Messages Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LIC015
Message The License Manager database restore operation failed.
Detailed
Description
This error occurs when the Lifecycle Controller restore operation is interrupted before it
completes. This can occur due to a power outage or when a system is rebooted before the
operation is completed.
Recommended
Response Action
Repeat the Lifecycle Controller restore operation. If the problem persists, contact technical
support. Refer to your product documentation to choose the contact method that is convenient
for you.
Category Audit
SubCategory LIC = Licensing
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LIC016
Message The feature dependencies of the license are not met.
Detailed
Description
The license includes features that are dependent upon additional licensed features not
included in this license. These licensed features are not activated until license(s) with the
dependent licensed features are imported to the system.
Recommended
Response Action
Import the license(s) that meet the license features dependencies.
Category Audit
SubCategory LIC = Licensing
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
342