Messages Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
IOV004
Message Unable to turn on PCIe device.
Detailed
Description
The chassis manager is unable to turn on the PCIe device because of one of the following
reasons: 1) PCIe device is not supported, 2) The device is not properly inserted in the slot, 3)
The device is not functioning properly, or 4) The device power requirements exceed the power
available for the slot.
Recommended
Response Action
Make sure a supported PCIe device is used and that it is properly inserted in the PCIe slot. For
a list of supported devices, contact the service provider.
Category Configuration
SubCategory IOV = IO Virtualization
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
IOV005
Message Chassis manager not ready to proccess commands.
Detailed
Description
In order for Chassis to execute most of its command the chassis must be powered on.
Recommended
Response Action
Power on chassis and retry the command.
Category Configuration
SubCategory IOV = IO Virtualization
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
293