Messages Reference Guide

HWC2010
Message The riser board cable or interconnect is connected.
Detailed
Description
None
Recommended
Response Action
No response action is required.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC2011
Message The riser board cable or interconnect is not connected, or is improperly connected.
Detailed
Description
The riser blade cable may be necessary for proper operation. System functionality may be
degraded.
Recommended
Response Action
Check presence, then re-install or reconnect.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message Riser board cable or interconnect failure. Check connection
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC1013
Message The USB cable is absent.
265