Messages Reference Guide

Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
FCD8503
Message The feature is activated in the chassis:
arg1
Arguments
•
arg1 =
feature name
Detailed
Description
Chassis already has the feature identified in the message activated. Only one instance of a
feature can be activated at a time. If the feature must be activated on the new card, it must be
deactivated before activating.
Recommended
Response Action
No response action is required
Category Audit
SubCategory FCD = Feature Card
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
FCD8504
Message The feature was previously activated on another chassis.
Detailed
Description
The card was installed installed and activated on another chassis. To use this card, it must be
deactivated (uninstalled) on the other chassis.
Recommended
Response Action
Remove the card and install it on the chassis where the feature is activated. To use this card
on a different chassis, it must be deactivated (uninstalled) on the chassis where it is activated
before activating it on the desired chassis.
Category Audit
SubCategory FCD = Feature Card
242