Messages Reference Guide

Severity Severity 2 (Warning)
Trap/EventID 4330
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
CTL78
Message Firmware image
arg1 is flashing on arg2 .
Arguments
•
arg1 =
args
•
arg2 =
Controller Name
Detailed
Description
This alert message occurs if controller firmware is flashed.
Recommended
Response Action
No response action is required.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 3 (Informational)
Trap/EventID 4331
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
CTL77
Message Flash of new firmware image(s) completed on
arg1
Arguments
•
arg1 =
Controller Name
Detailed
Description
This alert message occurs if controller firmware is flashed successfully.
Recommended
Response Action
No response action is required.
200