Messages Reference Guide

Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
CBL0001
Message Backplane
arg1 power cable disconnected.
Arguments
•
arg1 =
Bay ID
Detailed
Description
A backplane signal cable was detected, but the accompanying power cable was not present.
Recommended
Response Action
Check backplane configuration. Re-connect cable. If the issue persists, contact technical
support. Refer to the product documentation to choose a convenient contact method.
Category System Health
SubCategory CBL = Cable
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
CBL0002
Message Backplane
arg1 signal cable disconnected.
Arguments
•
arg1 =
Bay ID
Detailed
Description
A backplane power cable was detected, but the accompanying signal cable was not present.
Recommended
Response Action
Check backplane configuration. Re-connect cable. If the issue persists, contact technical
support. Refer to the product documentation to choose a convenient contact method.
Category System Health
100