Command Line Reference Guide

remoteimage
Description Connects, disconnects, or deploys a media file on a remote server.
To use this subcommand, you must have the Administrator permission.
Synopsis
racadm remoteimage <options>
Input
• -c - Connect the image.
• -d - Disconnect the image.
• -u - Username to access the network share.
• -p - Password to access the network share.
• -l - Image location on the network share; use double quotation marks with a
location.
• -s - Display current status; –a is assumed, if not specified.
Example
• racadm remoteimage -c -u "user" -p "pass" -l //shrloc/
foo.iso
Remote Image is now Configured
• racadm remoteimage -d - disconnect
Disable Remote File Started. Please check status using -s option to know Remote
File Share is ENABLED or DISABLED.
• racadm remoteimage -s - status
Remote File Share is Enabled
UserName
Password
ShareName //10.94.161.112/xxxx/dtk_3.3_73_Linux.iso
serveraction
Description Enables you to perform power management operations on the host system.
To use this subcommand, you must have the Execute Server Control Commands permission.
Synopsis
racadm serveraction <action>
Input
• -m < module > -
server-n, where n =1–4
• -a - Performs action on all servers. Not allowed with the powerstatus action.
• -f - Force the action. Required for the reseat action.
• < action >- Specifies the action. The options for the < action > string are:
— graceshutdown — Performs a graceful shutdown of the server. If the operating system
on the server cannot be cleanly shutdown, this operation will not be performed.
— hardreset — Performs a reset (reboot) operation on the managed system.
— powercycle — Issues a power-cycle operation on the managed system. This action is
similar to pressing the power button on the system’s front panel to turn off, and then turn on
the system.
— powerdown — Turns off the managed system.
81