Command Line Reference Guide

raid

Description Monitors, retrieves inventory, and configures the storage components connected to the

chassis.

NOTE: To use this subcommand, you must have the Chassis Administrator privilege.

Synopsis

racadm raid get status

racadm raid get <Object type>

racadm raid get <Object type> -o

racadm raid get <Object type> -o -p <property names

separated by comma>

racadm raid get <Object type>:<FQDD's of Object type

separated by comma>

racadm raid set <Set Operation>:<FQDD of Object type>

racadm raid set <Set Operation> -pdkey:<FQDD of PD>

racadm raid set <Set Operation> -vdkey:<FQDD of VD>

Input

NOTE: Maximum property names that can be specified in –p option is 10.

NOTE: Maximum FQDDs that can be specified is 3.

• (Object type) — controllers, vdisks, pdisks.

• Set Operation

– resetconfig

– exportlog

– forceonline

– deletevd

– blink

– unblink

– clearconfig

– importconfig

– ccheck

– cancelcheck

– patrolread

– hotspare

– init

– assignva

– createvd

• –o — Displays all the properties of the selected Key or Object.

• –p — Displays the property names with filter.

• FQDD — Displays all the properties of the FQDD's Key.

Example

• racadm raid get controllers

• racadm raid get controllers -o