Command Line Reference Guide

• –size: <VD size>: The size of the VD.

• b: Specify the size in bytes.

• k: Specify the size in kilobytes.

• m: Specify the size in megabytes.

• g: Specify the size in gigabytes.

• t: Specify the size in terabytes.

• -cc: Create a CacheCade or Enhanced Cache VD.

Example

racadm raid createvd:RAID.ChassisIntegrated.1-1 -rl r0 -

pdkey:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

deletevd

Description

Deletes the specified virtual drive.

Synopsis

racadm raid deletevd:<VD FQDD> {-current|-pending}

Input

• –current <optional>: Performs the configuration right now.

NOTE: If this requires the system to reboot, it will reboot.

• –pending: Save the configuration change for a later application. You can use a combination

of the –pending and –current flags on multiple commands to reduce the possible number of

system reboots.

Example

racadm raid deletevd:Disk.Virtual.0:RAID.ChassisIntegrated.1-1

discardcache

Description

Discards any pinned or persistent cache present on the RAID controller.

Synopsis

racadm raid discardcache:<Controller FQDD> {-current | -pending}

Input

• –current <optional>: Performs the configuration right now.

NOTE: If this requires the system to reboot, the system is rebooted.

• –pending: Save the configuration change for a later application. You can use a combination

of the –pending and –current flags on multiple commands to reduce the possible number of

system reboots.

Example

racadm raid discardcache:RAID.ChassisIntegrated.1-1

The syntax of the command specified is not correct.

exportlog

Description

Export a log from the device.

Synopsis

racadm raid exportlog:<FQDD> -l<CIFS or NFS share> -u<username> -

p <password> [-f <filename>]