Command Line Reference Guide

NOTE: To use this subcommand, you must have CMC Login User privilege.
Synopsis
• racadm getversion
• racadm getversion [-b | -c] [-m <module>]
• racadm getversion -l [-m <module>] [-f <filter>]
Input
NOTE: The -b, -c and -l options are not available for CMC modules.
NOTE: The -l option requires that the Lifecycle Controller service is enabled on the servers. For
version information, see the RACADM Readme available at dell.com/support/manuals.
• (none) — Displays the version information for all targets or devices.
<Server> <iDRAC Version> <Blade Type>
<
Gen> <Updatable>
server-4 1.30.30 (Build 26) PowerEdge M620
iDRAC7 Y
<Server> <CMC Version> <Updatable>
cmc-1 1.00.X23.201211271524 Y
<Chassis Infrastructure> <FW Version>
<FQDD>
Main Board
1.00.X08.201210242214 System.Chassis.1#Infrastructure.
1
<Storage Controller> <FW Version> <FQDD>
PERC H710PV Mini 23.8.0-0007
RAID.ChassisIntegrated.1-1
<Storage Enclosure> <FW Version> <FQDD>
PL100 0:0 0.12
Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1
<Physical Disk> <FW Version> <FQDD>
Physical Disk 0:0:0 ES65 Disk.Bay.
0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1
• -b - Displays the server's current BIOS version (default is iDRAC version).
• -c - Displays the server's current CPLD version.
• -l - Displays the firmware versions Lifecycle Controller components.
• -f < filter > - Filters the components. Must be used with -1 and be one of the following values:
– bios: BIOS
– idrac: iDRAC
– usc: Unified Server Configurator (Lifecycle Controller)
– diag: 32-bit Diagnostics
– drivers: OS Driver Package
– nic-x: Network Interface card. See -l output for possible values of x.
– raid-x: RIAD Controller. See -l output for possible values of x.
• -m < module > - Specifies the module or device for which you must retrieve the version
information.
< module > is one of the following:
– server-n, where n = 1 to 4. For example, cmc-2.
57