Command Line Reference Guide

Overall Power Health = OK
Redundancy = No
[System Power Policy Configuration]
System Input Power
Cap = 7928 W (7928
BTU/hr |
10%)
Surplus for Peak
Performance = 7000 W (6130
BTU/hr)
Redundancy Policy
= None
Dynamic PSU Engagement Enabled
= No
[Power Budgeting]
System Input Max Power
Capacity = 0 W
Input Redundancy
Reserve = 0 W
Input Power Allocated to
Servers = 0 W
Input Power Allocated to Chassis
Infrastructure = 51W
Total Input Power Available for
Allocation = 0 W
Standby Input Power
Capacity = 0 W
getraclog
Description
The getraclog command displays RAC log entries.
Synopsis
racadm getraclog [-s <start>] [-c <count>] [--more]
Input
NOTE: If no options are provided, the entire log is displayed.
• -c — Specifies the number of records to display.
• -s — Specifies the starting record used for the display.
• --more — Displays one screen at a time and prompts the user to continue.
Output
The default output display shows the record number, message ID, category, agent ID, severity, time
stamp, message arg, and message. The timestamp begins at midnight, January 1, and increases until
the system restarts. After the system restarts, the system’s timestamp is used.
SeqNumber = 4
Message ID = CMC8550
Category = Audit
AgentID = CMC
Severity = Information
Timestamp = 1982-03-21 05:33:35
Message Arg 1 = Healthy
Message = Chassis health is Healthy
Example
• Displays all the logs.
racadm getraclog
50