Command Line Reference Guide

Server-1-B Gigabit
Ethernet
Present Not
Installed
Not
Installed
iSCSI Present Not
Installed
Not
Installed
Server-1-C Fibre
Channel 4
Present Not
Installed
Not
Installed
Server-2-A Gigabit
Ethernet
Present 00:22:19:D2:
1E:84
N/A N/A
iSCSI Present N/A N/A
Server-2-B Gigabit
Ethernet
Present Not
Installed
Not
Installed
iSCSI Present Not
Installed
Not
Installed
Server-2-C Fibre
Channel 4
Present Not
Installed
Not
Installed
Server-3 N/A Not Present N/A N/A N/A
Server-4-A Gigabit
Ethernet
Present 00:18:8B:FF:
45:2A
00:18:8B:FF:
AA:02
00:18:8B:FF:
AA:04
iSCSI Present 00:18:8B:FF:
AA:03
00:18:8B:FF:
AA:05
Server-4-B Gigabit
Ethernet
Not Present Not
Installed
Not
Installed
iSCSI Present Not
Installed
Not
Installed
Server-4-C Fibre
Channel 4
Present Not
Installed
Not
Installed
Switch-1 None Present N/A 00:00:00:00:
00:00
N/A
getmodinfo
Description
Displays configuration and status information for all modules or a specified module (server, switch,
CMC, fan unit, blower, power supply unit, chassis, DVD, main-board, IO cable, and FPC cable) in the
chassis.
To use this subcommand, you must have CMC Login User privilege.
NOTE: The service tag field is blank for modules that do not have service tags.
Synopsis
racadm getmodinfo [-m <module>] [-A]
Input
• -m < module > — Specifies the module for which the configuration and status information is
required. The default command (no options) displays information about all the major
components in the chassis.
42