Command Line Reference Guide

If errors are not encountered, this subcommand displays
the contents of the specified configuration.
Example
• Displays all of the configuration properties
(objects) that are contained in the group
cfgLanNetworking.
racadm getconfig -g
cfgLanNetworking
• Saves all group configuration objects from iDRAC
to myrac.cfg.
racadm getconfig -f myrac.cfg
• Displays a list of the available configuration
groups on iDRAC in an alphabetical order.
racadm getconfig -h
• Displays the configuration properties for the user
named root.
racadm getconfig -u root
• Displays the user group instance at index 2 with
verbose information for the property values.
racadm getconfig -g cfgUserAdmin
-i 2 -v
getdcinfo
Description Displays general I/O module and daughter card configuration information. Only the
CMC controls daughtercards.
To use this subcommand, you must have the CMC Login User privilege.
NOTE: Fabric verification for server DCs is performed only when the chassis is
turned on. When the chassis is on stand-by power, iDRACs on the server modules
remain turned off and thus are unable to report the server's DC fabric type. The
DC fabric type may not be reported in the CMC user interface until iDRAC on the
server is turned on.
Synopsis
racadm getdcinfo
Input -n — Displays the model names for the daughter cards in servers.
Example
The following example is for a system with multi-slot servers.
racadm getdcinfo
Group A I/O Type : Gigabit Ethernet
Group B I/O Type : PCIe
Group C I/O Type : PCIe
<IO#> <Type> <State> <Role>
switch-1 Gigabit Ethernet OK Master
37