Command Line Reference Guide

cfgSerialConsoleColumns
Description Specifies the number of columns in the terminal window
command line connected to the serial port. You must log
out, then log in again for the changes to take effect.
NOTE: The prompt counts as two characters.
NOTE: The terminal emulator must be configured with
the line wrap mode ON, if a terminal emulator is used.
Legal Values 0–256
Default 0 (equivalent to 80)
cfgSerialHistorySize (Read/Write)
Description Specifies the maximum size of the serial history buffer.
Legal Values 0 – 8192
Default 8192
cfgSerialSshEnable (Read/Write)
Description Enables or disables the secure shell (SSH) interface on
CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 1
Example
racadm getconfig -g cfgSerial
cfgSerialBaudRate=115200
cfgSerialConsoleEnable=1
cfgSerialConsoleQuitKey=^\
cfgSerialConsoleIdleTimeout=1800
cfgSerialConsoleNoAuth=0
cfgSerialConsoleCommand=
cfgSerialConsoleColumns=0
cfgSerialHistorySize=8192
cfgSerialTelnetEnable=0
cfgSerialSshEnable=1
cfgSerialTelnetEnable (Read/Write)
Description
Enables or disables the Telnet console interface on CMC.
Legal Values
• 1 (TRUE)
115