Users Guide

where <index> is a value between 1–4. CMC uses the index number to distinguish up to four destination email

addresses that can be configured.

5. Specify a destination email address to receive the email alerts:

racadm config -g cfgEmailAlert -o cfgEmailAlertAddress <email address> -i

<index>

where <email address> is a valid email address, and <index> is the index value you specified in step 4.

6. Specify the name of the person receiving the email alert:

racadm config -g cfgEmailAlert -o cfgEmailAlertEmailName <email name> -i

<index>

where <email name> is the name of the person or group receiving the email alert, and <index> is the index

value specified in step 4 and step 5. The email name can contain up to 32 alphanumeric characters, dashes,

underscores, and periods. Spaces are not valid.

7. Setup the SMTP host:

racadm config -g cfgRemoteHosts -o cfgRhostsSmtpServerIpAddr host.domain

where host.domain is the FQDN.

You can configure up to four destination email addresses to receive email alerts. To add more email addresses,

perform tasks in step 2 through 6.

NOTE: The commands in steps 2–6 overwrite any existing settings configured for the index that you specify

(1–4). To determine whether an index has previously configured values, type racadm getconfig -g

cfgEmailAlert — I <index>. If the index is configured, values appear for the cfgEmailAlertAddress

and cfgEmailAlertEmailName objects.

For more information, see the

Chassis Management Controller for PowerEdge VRTX RACADM Command Line

Reference Guide

available at dell.com/support/manuals.