Users Guide
Interface Description
For client connection using Microsoft WinRM, the minimum required version is 2.0.
For more information, refer to the Microsoft article, <support.microsoft.com/kb/
968929>.
NOTE: The default values of CMC user name and password are root and calvin respectively.
Launching CMC Using Other Systems Management Tools
You can also launch CMC from the Dell Server Administrator or Dell OpenManage Essentials.
To access CMC interface using Dell Server Administrator, launch Server Administrator on your management station. In
the left pane of the Server Administrator home page, click System → Main System Chassis → Remote Access
Controller. For more information, see the
Dell Server Administrator User’s Guide
at dell.com/support/manuals.
Downloading and Updating CMC Firmware
To download the CMC firmware, see Downloading CMC Firmware.
To update the CMC firmware, see Updating CMC Firmware.
Setting Chassis Physical Location and Chassis Name
You can set the chassis location in a data center and the chassis name to identify the chassis on the network (default
name is Dell Rack System). For example, an SNMP query on the chassis name returns the name you configure.
Setting Chassis Physical Location and Chassis Name Using Web Interface
To set the chassis location and chassis name using the CMC web interface:
1. In the left pane, go to Chassis Overview, and then click Setup .
2. On the General Chassis Settings page, type the location properties and the chassis name. For more information
about setting chassis properties, see the
CMC Online Help
.
NOTE: The Chassis Location field is optional. It is recommended to use the Data Center, Aisle, Rack, and Rack
Slot fields to indicate the physical location of the chassis.
3. Click Apply. The settings are saved.
Setting Chassis Physical Location and Chassis Name Using RACADM
To set the chassis name, location, date, and time by using the command line interface, see the setsysinfo and
setchassisname commands. For more information, see the
Chassis Management Controller for PowerEdge VRTX
RACADM Command Line Reference Guide
.
Setting Date and Time on CMC
You can manually set the date and time, or you can synchronize the date and time with a Network Time Protocol (NTP)
server.
34