Users Guide

Standard Schema Active Directory Overview
As shown in the following figure, using standard schema for Active Directory integration requires configuration on both
Active Directory and CMC.
In Active Directory, a standard group object is used as a role group. A user who has CMC access is a member of the role
group. To give this user access to a specific CMC card, the role group name and its domain name need to be configured
on the specific CMC card. The role and the privilege level is defined on each CMC card and not in the Active Directory.
You can configure up to five role groups in each CMC. The following table shows the default role group privileges.
Table 13. : Default Role Group Privileges
Role Group Default Privilege Level Permissions Granted Bit Mask
1 None
• CMC Login User
• Chassis
Configuration
Administrator
• User Configuration
Administrator
• Clear Logs
Administrator
• Chassis Control
Administrator
(Power Commands)
• Server
Administrator
• Test Alert User
• Debug Command
Administrator
• Fabric A
Administrator
0x00000fff
2 None
• CMC Login User
• Clear Logs
Administrator
• Chassis Control
Administrator
(Power Commands)
• Server
Administrator
• Test Alert User
• Fabric A
Administrator
0x00000ed9
3 None CMC Login User 0x00000001
4 None No assigned permissions 0x00000000
5 None No assigned permissions 0x00000000
NOTE
: The Bit Mask values are used only when setting Standard Schema with the RACADM.
NOTE: For more information about user privileges, see Types of Users.
104