Reference Guide
Recommended
Response Action
Check for factors that may cause overheating. For example, verify that the enclosure fan is
working. You should also check the thermostat settings and examine whether the enclosure is
located near a heat source. Make sure the enclosure has enough ventilation and that the room
temperature is not too hot. Refer to the enclosure documentation for more diagnostic
information.
Category Storage
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID 4209
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
TMP1003
Message
arg1
has crossed the minimum failure threshold.
Arguments
•
arg1 =
tempsensor name
Detailed
Description
The enclosure is too cold.
Recommended
Response Action
Check whether the thermostat setting is too low and whether the room temperature is too cool.
Category Storage
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID 4209
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
TMP5
Message The temperature probe maximum warning value was changed on
arg1
.
822