Reference Guide
Severity Severity 2 (Warning)
Trap/EventID 4274
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
BAT1012
Message The
arg1
battery temperature is above normal.
Arguments
•
arg1 =
Controller name
Detailed
Description
Diagnostic event for service to determine if there is an ambient temperature problem.
Recommended
Response Action
No response action is required.
Category Storage
SubCategory BAT = Battery Event
Severity Severity 3 (Informational)
Trap/EventID 4275
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
BAT1013
Message Recharge count has exceeded the maximum limit for battery on
arg1
.
Arguments
•
arg1 =
Controller name
Detailed
Description
The battery cannot be recharged further.
Recommended
Response Action
Replace the battery pack.
Category Storage
77