Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.0 for Dell PowerEdge VRTX

Recommended

Response Action

No response action is required.

Category Storage

SubCategory BAT = Battery Event

Severity Severity 3 (Informational)

Trap/EventID 4275

LCD Message No LCD message display defined.

Initial Default. SNMP Alert;#LCD;#Remote System Log

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE

BAT1033

Message The battery on

arg1

was removed.

Arguments

•

arg1 =

controller name

Detailed

Description

The controller cannot communicate with the battery. Either the battery was removed, or the

contact point between the controller and the battery is degraded.

Recommended

Response Action

Make sure that the battery is present and properly connected. If the battery is present, wait for

a few minutes and re-check if the battery is detected. If the contact point between the battery

and the controller is degraded, you must replace the battery, the controller, or both. Refer to

the storage hardware documentation for information on how to safely access, or remove.

Contact technical support if the issue persists.