Reference Guide

PWR8593
Message Chassis Management Controller is unable to turn on or turn off the chassis because the
chassis infrastructure component firmware update is in progress.
Detailed
Description
The chassis power operation cannot be performed when a chassis infrastructure firmware
update is in progress.
Recommended
Response Action
Retry the operation after the chassis infrastructure component firmware update is complete.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PWR8594
Message Chassis Management Controller is unable to set the Enhanced Cooling Mode because the
requested power
arg1 AC Watt is more than available power arg2 AC Watt.
Arguments
•
arg1 =
requested watts
•
arg2 =
available watts
Detailed
Description
The available power is not sufficient to enable the Enhanced Cooling Mode feature.
Recommended
Response Action
Make sure there is enough power supply to enable the Enhanced Cooling Mode feature. Go to,
the Chassis Overview > Power > Power Budget Status. In the Total Input Power Available For
Allocation field view the available power. To add more power, insert more PSUs or remove
unused components from the chassis.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
594