Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.0 for Dell PowerEdge VRTX

581

582

583

584

585

586

587

588

589

590

Trap/EventID FALSE

LCD Message No LCD message display defined.

Initial Default. None

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE

PWR8584

Message Chassis Management Controller is unable to turn on server-

arg1

because the power supply

redundancy is lost and Performance Over Power Redundancy feature is disabled and the

power required is less than the available power.

Arguments

•

arg1 =

slot number

Detailed

Description

If power redundancy is lost and the server Performance Over Power Redundancy feature is

disabled, the server turn-on will not be allowed.

Recommended

Response Action

To enable the server to be turned-on, on the Power Configuration page in the Web UI, enable

the server Performance Over Power Redundancy option . Using the RACADM utility, tun the

following command "racadm config -g cfgChassisPower -o

cfgChassisPerformanceOverRedundancy 1". Then retry the oepration.

Category Audit

SubCategory PWR = Power Usage

Severity Severity 3 (Informational)