Reference Guide

Detailed
Description
The enclosure detected that a power supply unit was removed and is no longer functioning in
optimal condition.
Recommended
Response Action
Re-insert the power supply unit into the enclosure. Re-connect the AC power cable and switch
on the power supply unit. Contact technical support if the issue persists.
Category Storage
SubCategory PSU = Power Supply
Severity Severity 1 (Critical)
Trap/EventID 4233
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PSU1004
Message Power supply cable has been inserted into
arg1 .
Arguments
• arg1 = PSU Sensor Name
Detailed
Description
The enclosure detected that AC power supply was restored to the power supply unit.
Recommended
Response Action
No response action is required.
Category Storage
SubCategory PSU = Power Supply
Severity Severity 3 (Informational)
Trap/EventID 4235
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PSU1001
Message
arg1 has failed.
Arguments
•
arg1 =
PSU Sensor Name
520