Reference Guide

PDR58
Message
arg1 is incompatible.
Arguments
•
arg1 =
PD Name
Detailed
Description
A user attempted to replace a disk with another disk that is using an incompatible technology.
For example, replaced one side of a mirror with a SAS disk when the other side of the mirror is
using SATA technology.
Recommended
Response Action
Refer to the hardware documentation for information on replacing disks.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR59
Message A bad disk block was reassigned on
arg1 .
Arguments
•
arg1 =
physical disk
Detailed
Description
The disk has a bad block. Data was remapped to another disk block. No data loss has
occurred.
Recommended
Response Action
Monitor the disk for other messages or indications of poor health.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 3 (Informational)
Trap/EventID 4347
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
457