Reference Guide

Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR44
Message The clear operation on
arg1 failed.
Arguments
•
arg1 =
physical disk
Detailed
Description
A Clear task was being performed on a physical disk but the task was interrupted and did not
complete successfully. The controller may have lost communication with the disk, the disk was
removed, or the cables may be loose or defective.
Recommended
Response Action
Verify that the disk is present and not in a Failed state. Make sure the cables are attached
securely. See the storage hardware documentation for more information on checking the
cables. Restart the Clear task.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 1 (Critical)
Trap/EventID 4345
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
PDR46
Message Patrol Read found an uncorrectable media error on
arg1 .
Arguments
•
arg1 =
physical disk
Detailed
Description
The Patrol Read task has encountered an error that cannot be corrected. There may be a bad
disk block that cannot be remapped.
Recommended
Response Action
Backup your data from the disk. Start disk initialization and wait for it to complete, then restore
the data from the backup to the disk.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 1 (Critical)
450