Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.0 for Dell PowerEdge VRTX

431

432

433

434

435

436

437

438

439

440

Trap/EventID 4346

LCD Message No LCD message display defined.

Initial Default. SNMP Alert;#LCD;#Remote System Log

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE

PDR22

Message SMART warning temperature for

arg1

Arguments

•

arg1 =

PD Name

Detailed

Description

A disk has reached an unacceptable temperature and received a SMART alert (predictive

failure). The disk is likely to fail in the near future.

Recommended

Response Action

Do the following: 1) Determine why the physical disk reached an unacceptable temperature.

For example, a fan failure, incorrect thermostat settings, or the room temperature may be too

hot or cold. 2) Verify that the fans in the server or enclosure are working. 3) If the physical disk

is in an enclosure, check the thermostat settings and examine whether the enclosure is

located near a heat source. Verify the enclosure has enough ventilation and that the room

temperature is not too hot. Refer to the enclosure documentation for more diagnostic

information. 4) If you cannot identify why the disk has reached an unacceptable temperature,

then replace the disk. If the physical disk is a member of a non-redundant virtual disk, then

back up the data before replacing the disk. Removing a physical disk that is included in a non-

redundant virtual disk causes the virtual disk to fail and may cause data loss.

Category Storage

SubCategory PDR = Physical Disk

Severity Severity 2 (Warning)