Manualshelf

Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.0 for Dell PowerEdge VRTX
331332333334335336337338339340
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LIC503
Message Unable to complete the current operation. The currently installed license does not support the
following features:
arg1
.
Arguments
•
arg1 =
licensable features
Detailed
Description
The currently installed license does not support the feature for the requested operation. The
operation requires a valid license to enable specific features in the system. Since the required
license is missing or expired, the features that are being accessed during the operation are
disabled.
Recommended
Response Action
Acquire and install the license to enable the required feature, and retry the operation. If the
problem persists, contact technical support or see product documentation for more
information.
Category Audit
SubCategory LIC = Licensing
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LIC000
Message The License Manager action succeeded.
Detailed
Description
This command was successful.
Recommended
Response Action
No response action is required.
Category Audit
SubCategory LIC = Licensing
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
334