Reference Guide

LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
CTL46
Message Single-bit ECC error. The
arg1 DIMM is critically degraded.
Arguments
•
arg1 =
Controller name
Detailed
Description
The Dual In-line Memory Module (DIMM) is malfunctioning. Data loss or data corruption may
occur..
Recommended
Response Action
Replace the DIMM immediately to avoid data loss or data corruption. The DIMM is a part of the
controller battery pack. Refer to the storage hardware documentation for information on
replacing the DIMM.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 1 (Critical)
Trap/EventID 4329
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
CTL47
Message Single-bit ECC error on
arg1 .
Arguments
•
arg1 =
Controller name
Detailed
Description
The Dual In-line Memory Module (DIMM) is malfunctioning. Data loss or data corruption may
occur. The DIMM must be replaced immediately.
Recommended
Response Action
Replace the DIMM immediately. The DIMM is a part of the controller battery pack. Refer to
your hardware documentation for information on replacing the DIMM.
Category Storage
SubCategory CTL = Storage Contr
184