Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.0 for Dell PowerEdge VRTX

181

182

183

184

185

186

187

188

189

190

Detailed

Description

An error involving multiple bits has been encountered during a read or write operation. The

error correction algorithm recalculates parity data during read and write operations. If an error

involves only a single bit, it may be possible for the error correction algorithm to correct the

error and maintain parity data. An error involving multiple bits, however, generally indicates

data loss. In some cases, if the multi-bit error occurs during a read operation, then the data on

the disk may be ok. If the multi-bit error occurs during a write operation, then data loss has

occurred.

Recommended

Response Action

Replace the Dual In-line Memory Module (DIMM). The DIMM is a part of the controller battery

pack. Refer to the storage hardware documentation for information on replacing the DIMM.

You may need to restore data from backup.

Category Storage

SubCategory CTL = Storage Contr

Severity Severity 1 (Critical)

Trap/EventID 4329

LCD Message No LCD message display defined.

Initial Default. SNMP Alert;#LCD;#Remote System Log

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE

CTL41

Message Single-bit ECC error on

arg1

Arguments

•

arg1 =

Controller name