Reference Guide

CMC8512
Message The Extended Storage feature activation timed out. The feature is not active.
Detailed
Description
The Extended Storage feature is not activated if the removable flash media SD card on the
secondary CMC does not respond within 90 seconds after activation is initiated.
Recommended
Response Action
Do the following and retry the operation: 1) In the CMC Web interface, go to Chassis Controller
> Flash Media > Configuration, and verify if the SD card on secondary CMC displays errors. 2) If
errors are displayed, execute the following racadm command: "racadm cmcchangover". 3)
Repair the removable flash media SD Card by selecting the Chassis Controller > Flash Media >
Configuration > Repair Active Controller Media in the CMC Web interface. Repairing is only
allowed on the SD card of the primary CMC. If the problem persists, replace the card.
Category Audit
SubCategory CMC = Chassis Management Controller
Severity Severity 1 (Critical)
Trap/EventID 8689
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#EMAIL Alert;#LC Log;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
CMC8513
Message The Extended Storage feature activation on the secondary CMC timed out. The feature is being
returned to single CMC mode.
Detailed
Description
The Extended Storage feaure activtion on the secondary CMC timed out. If the media on
Standby CMC doesnt respond within 90 seconds of confirming activation the feature returns to
single CMC mode.
Recommended
Response Action
Do the following and retry the operation: 1) In the CMC Web interface, go to Chassis Controller
> Flash Media > Configuration, and verify if the SD card on secondary CMC displays errors. 2) If
errors are displayed, execute the following racadm command: "racadm cmcchangover". 3)
Repair the removable flash media SD Card by selecting the Chassis Controller > Flash Media >
Configuration > Repair Active Controller Media in the CMC Web interface. Repairing is only
allowed on the SD card of the primary CMC. If the problem persists, replace the card.
Category Audit
SubCategory CMC = Chassis Management Controller
Severity Severity 2 (Warning)
Trap/EventID 8690
LCD Message No LCD message display defined.
111