Reference Guide

4 Enabled Not Present

idrac System Disabled

Display the current FlexAddress setting for slot 1.

racadm getflexaddr -i 1

Slot-1 server presence = Present

Slot-1 flexaddress enabled = 1

Fabric> <Type> <Server-Assigned> <Chassis-Assigned>

slot1-A1 Gigabit Ethernet 00:1C:

23:CD:AC:D2(active)

00:1E:C9:FF:E3:21

iSCSI 00:1C:

23:CD:AC:D3(active)

00:1E:C9:FF:E3:22

getioinfo

Description Displays general information about the I/O modules on the chassis.

To use this subcommand, you must have the CMC Login User privilege.

NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet, Fiber Channel,

and Infiniband.

Synopsis

racadm getioinfo

Example

racadm getioinfo

switch-1 Dell

Ethernet

Passthroug

Gigabit

Ethernet

Present OK ON Master

getled

Description Displays the LED settings on a module: blinking, not

blinking, or unknown (for empty slots).

To use this subcommand, you must have the Login User

privilege.

Synopsis

racadm getled -m <module>

Input CMC only options:

-m <

module

> — Specifies the module whose LED settings

you want to view.

module

> can be one of the following:

• server-n where n=1–4

• switch-n where n=1