User's Manual

38 Carrier Grade Chassis Management Controller User’s Guide Addendum
Configuring Power Budget and Redundancy
CMC's power management service optimizes power consumption for the
entire chassis (the chassis, servers, IOMs, iKVM, CMC, and PSUs) and re-
allocates power to different modules based on the demand.
Using Web Interface
NOTE: To perform power management actions, you must have Chassis
Configuration Administrator privilege.
To configure power budget using the Web interface:
1
Log in to the CMC Web interface.
2 Select Chassis Overview in the system tree.
3 Click Power  Configuration .
The Budget/Redundancy Configuration page is displayed.
4
Set any or all of the properties described in Table x-16 according to your
needs.
5 Click Apply to save your changes.
To refresh the content on the Budget/Redundancy Configuration page, click
Refresh. To print the contents, click Print.
Table 1-14. Chassis Power Supplies
Item Description
Name Displays the name of the PSU in the format PS-n, where n, is the
PSU number.
Power State Displays the power state of the PSU - Initializing, Online, Stand
By, In Diagnostics, Failed, Unknown, or Absent (missing).
Input Volts Displays the present input voltage of the power supply.
Input Current Displays the present input current of the power supply.
Output Rated
Power
Displays the maximum output power rating of the power supply.