User's Manual

Carrier Grade Chassis Management Controller User’s Guide Addendum 37
Table 1-13. Server Modules
Item Description
Slot Displays the location of the server module. The Slot is a
sequential number (1-16) that identifies the server module by its
location within the chassis.
Name Displays the server name. The server name is defined by the user.
Type Displays the type of the server.
Priority of the
relocated server.
Displays the priority level allotted to the server slot in the chassis
for power budgeting. CMC uses this value in its calculations
when power must be reduced or reallocated based on user-
defined power limits or power supply or power grid failures.
Priority levels: 1 (highest) through 9 (lowest)
Default: 1
NOTE: Server slot priority level is associated with the server slot-
not with the server inserted into the slot. If you move a server to a
different slot in the chassis or to a different chassis, the priority
previously associated with new slot determines the priority
Power State Displays the power status of the server:
• N/A: CMC has not determined the power state of the server.
• Off: Either the server or chassis is off.
• On: Both chassis and server are on.
• Powering On: Temporary state between Off and On. When the
powering on cycle completes, the Power State changes to On.
• Powering Off: Temporary state between On and Off. When the
powering off cycle completes, the Power State changes to Off.
Budget Allocation
- Actual
Displays the power budget allocation for the server module.
Actual: Current power budget allocation for each server.