User's Manual

Carrier Grade Chassis Management Controller User’s Guide Addendum 33

Viewing Power Budget Status

CMC provides power status overviews of the power subsystem on the Power

Budget Status page.

Using Web Interface

NOTE: To perform power management actions, you must have Chassis

Configuration Administrator privilege.

To view power budget status using Web interface:

Select

Chassis Overview

in the system tree.

Click

Power



Budget Status

The Power Budget Status page displays.

Table Table 1-12 through Table 1-15describe the information displayed on

the Power Budget Status page.

For information about configuring the settings for this information, see

Configuring Power Budget and Redundancy

Using RACADM

Open a serial/Telnet/SSH text console to CMC, log in, and type:

racadm getpbinfo

For more information about getpbinfo, including output details, see the

getpbinfo command section in the RACADM Command Line Reference

Guide Addendum for Carrier Grade Chassis Management Controller.

Cumulative Power

Start Time

Real-time measurement of the cumulative power that the

server has consumed since the time displayed in the Start

Time field. The measurement is presented in kilowatt hours

(kWh).

Peak Consumption

Time Stamp

Displays the peak power that the server consumed at one

time. The time when the peak power consumption occurred is

recorded in the Time Stamp field. The measurement is

displayed in watts.

Table 1-10. Server Modules

Item Description