User's Manual

32 Carrier Grade Chassis Management Controller User’s Guide Addendum
Table 1-9. Real-Time Energy Statistics Status
Item Description
System Energy
Consumption
Displays the current cumulative energy consumption for all
modules in the chassis measured from the input side of the
power supplies. The value is displayed in KWh and it is a
cumulative value.
System Energy
Consumption Start
Time
Displays the date and time recorded when the system energy
consumption value was last cleared, and the new
measurement cycle began. The timestamp is displayed in the
format hh:mm:ss MM/DD/YYYY, where hh is hours (0-24),
mm is minutes (00-60), ss is seconds (00-60), MM is the
month (1-12), DD is the day (1-31), and YYYY is the year.
This value is reset with the Reset Energy Statistics button,
but persists through a CMC reset or failover operation.
System Energy
Consumption
Timestamp
Displays the date and time when the system energy
consumption was calculated for display. The timestamp is
displayed in the format hh:mm:ss MM/DD/YYYY, where hh is
hours (0-24), mm is minutes (00-60), ss is seconds (00-60),
MM is the month (1-12), DD is the day (1-31), and YYYY is
the year.
Table 1-10. Server Modules
Item Description
Slot Displays the location of the server module. The Slot is a
sequential number (1-16) that identifies the server module by
its location within the chassis.
Name Displays the server name. The server name can be redefined
by the user.
Present Displays whether the server is present in the slot (Yes or No).
If this field displays Extension of # (where the # is 1-8), then
number that follows it is the main slot of a multi-slot server.
Actual (Input) Real-time measurement of the actual power consumption of
the server. The measurement is displayed in watts.