User's Manual

30 Carrier Grade Chassis Management Controller User’s Guide Addendum
Peak System Power
Timestamp
Displays the minimum system level input power
consumption value (in watts) over the time since the user last
cleared this value. This property allows you to track the
minimum power consumption by the system (chassis and
modules) recorded over a period of time. Click Reset
Peak/Min Power Statistics below the table to clear this value.
The value for minimum system power is displayed in both
watts and BTU/h units. This value is reset with the Reset
Peak/Min Power Statistics button and also when CMC resets
or fails over.
Peak System Power
Timestamp
Displays the minimum system level input power
consumption value (in watts) over the time since the user last
cleared this value. This property allows you to track the
minimum power consumption by the system (chassis and
modules) recorded over a period of time. Click Reset
Peak/Min Power Statistics below the table to clear this value.
The value for minimum system power is displayed in both
watts and BTU/h units. This value is reset with the Reset
Peak/Min Power Statistics button and also when CMC resets
or fails over.
Minimum System
Power Start Time
Displays the date and time recorded when the minimum
system power consumption value was last cleared. The
timestamp is displayed in the format hh:mm:ss
MM/DD/YYYY, where hh is hours (0-24), mm is minutes (00-
60), ss is seconds (00-60), MM is the month (1-12), DD is the
day (1-31), and YYYY is the year. This value is reset with the
Reset Peak/Min Power Statistics button and also when CMC
resets or fails over.
Minimum System
Power Timestamp
Displays the date and time recorded when the minimum
system power consumption occurred over the time period
being recorded. The format of the timestamp is the same as
described for Peak System Power Timestamp.
Table 1-8. Real-Time Power Statistics
(continued)
Item Description