User's Manual

Carrier Grade Chassis Management Controller User’s Guide Addendum 27
Table 1-5. Power Supplies
Item Description
Name Displays the name of the power supply unit: PS-[n], where [n] is
the power supply number.
Present Indicates whether the PSU is Present or Absent.
Health OK Indicates that the PSU is present and
communicating with CMC. In the event of a
communication failure between CMC and the
power supply, CMC cannot obtain or display
health status for the PSU.
Warning Indicates that only Warning alerts have been
issued, and corrective action must be taken.
If corrective actions are not taken, it could lead
to critical or severe power failures that can
affect the integrity of the chassis.
Severe Indicates that at least one Failure alert has
been issued for the power supply. Severe status
indicates a power failure on the chassis, and
corrective action must be taken immediately.
Power Status Displays the power state of the power supplies (one of the
following): Initializing, Online, Stand By, In Diagnostics, Failed,
Offline, Unknown, or Absent.
Capacity Displays the power supply’s capacity in watts.
Table 1-6. System Power Status
PSU Configuration Dynamic PSU Engagement
Overall Power Health Displays the health status (OK, Non-Critical,
Critical, Non-Recoverable, Other, Unknown) of
the power management for the entire chassis.
System Power Status Displays the power status (On, Off, Powering
On, Powering Off) of the chassis.