User's Manual

26 Carrier Grade Chassis Management Controller User’s Guide Addendum

The Chassis Graphics page provides a graphical overview of all PSUs installed

in the chassis.

To view health status for all PSUs using Chassis Graphics:

The Chassis Status page is displayed. The lower section of Chassis

Graphics depicts the rear view of the chassis and contains the health status

of all PSUs. PSU health status is indicated by the color of the PSU sub-

graphic:

• Green - PSU is present, powered on and communicating with CMC;

there is no indication of an adverse condition.

• Amber - Indicates a PSU failure. See the CMC log for details on the

failure condition.

• Gray - Occurs during PSU initialization and when the PSU is set to

standby, during Chassis power up, or PSU insertion. PSU is present

and not powered on. There is no indication of an adverse condition.

Use the cursor to hover over the individual PSU sub-graphic and a

corresponding text hint or screen tip is displayed. The text hint provides

additional information on that PSU.

The PSU sub-graphic is hyperlinked to the corresponding CMC GUI page

to provide immediate navigation to the

Power Supply Status

page for all

PSUs.

To view the health status of the PSUs using Power Supply Status:

Select

Power Supplies

in the system tree.

The

Power Supply Status

page is displayed.

Table 1-5 and Table 1-7 provide descriptions of the information provided on

the Power Supply Status page.