Quick Reference Guide

RACADM Command Line Reference Guide Addendum for Carrier Grade CMC 3
Overview
This addendum provides the changes to the RACADM Command Line
Interface for Carrier Grade CMC. The controller firmware Carrier Grade
CMC for NEBS enabled chassis requires changes to the command line
interface due to the use of DC input power. This document only provides the
updated RACADM commands for DC input power operation. For all other
commands, see the RACADM Command Line Reference Guide for iDRAC7
1.00.00 and CMC 4.1 available at support.dell.com/manuals.
The following racadm commands are updated for Carrier Grade CMC:
•getpbinfo
•getsensorinfo
getpbinfo
Example
[Power Budget Status]
System Input Power = 775 W
Peak System Power = 775 W
Peak System Power Timestamp = 09:21:22 07/13/2012
Minimum System Power = 733 W
Minimum System Power Timestamp = 09:18:28 07/13/2012
Overall Power Health = OK
Redundancy = Yes
System Input Power Cap = 16685 W
Redundancy Policy = Grid Redundancy
Dynamic PSU Engagement Enabled = No
System Input Max Power Capacity = 8916 W
Input Redundancy Reserve = 8916 W
Input Power Allocated to Servers = 910 W
Input Power Allocated to Chassis Infrastructure = 216 W
Total Input Power Available for Allocation = 7057 W
Standby Input Power Capacity = 0 W
Server Based Power Management Mode = No
Description Displays power budget status information.
To use this subcommand, you must have CMC Login
User privilege.
Synopsis racadm getpbinfo