Owner's Manual

Introduction
This readme contains information for CMC 4.16.
The Dell Chassis Management Controller (CMC) is a hot-pluggable systems management hardware and
software solution designed to provide the following functions for Dell PowerEdge M1000e chassis system:
• Remote management capabilities
• Power control
• Cooling control
Criticality
2 – Recommended
What’s New
This release of CMC supports the following features:
• Support for DC Power Supplies (P/N 0HPTJR, -36VDC to -72VDC input).
Hardware and Software Requirements
For information on Hardware and Software requirements see the Dell Chassis Management Controller
Firmware Version 4.1 User’s Guide.
Installation
For information on Installation see the Dell Chassis Management Controller Firmware Version 4.1 User’s
Guide.
Prerequisites
For information on Pre-requisites see the Dell Chassis Management Controller Firmware Version 4.1 User’s
Guide.
Supported Systems
CMC version 4.16 is supported on the following Dell PowerEdge(TM) system in the Dell PowerEdge M1000e
system enclosure:
• Dell PowerEdge M620
Supported Web Browsers
CMC version 4.16 is supported on the following web browsers:
• Microsoft Internet Explorer 7: Windows XP 32-bit SP3, Windows Vista SP2 x32 and x64, Windows
Server 2003 SP2 x32 and x64, Windows Server 2008 SP2 x32 and x64.
• Microsoft Internet Explorer 8: Windows XP 32-bit SP3, Windows Vista x32 and x64 SP2, Windows 7
x32 and x64, Windows Server 2003 x32 and x64 SP2, Windows Server 2008 x32 and x64, Windows
Server 2008 R2 x64.