Setup Guide

RPM Online Insertion
Dell Networking systems can function with only one RPM. If you insert a second RPM, it comes online as the standby RPM. To display the
status of installed RPMs, enter the show rpm all command.
Dell# show rpm all
-- Route Processor Modules --
Slot Status NxtBoot Version
------------------------------------------
0 active online 1-0(0-4095)
1 standby online 1-0(0-4095)
Line Card Online Insertion
When you insert a line card into an online chassis, the Dell Networking OS detects the line card type. The system writes the line card type
to the running conguration and maintains this information as a logical conguration if you remove the card. To display the status of
installed line cards, enter the show linecard all command.
Dell# show linecard all
-- Linecard Info --
LinecardId Type Status ReqTyp CurTyp Version Ports
----------------------------------------------------------------------------
0 Linecard online C9000LC2410T C9000LC2410T 1-0(0-4095) 24
1 Linecard online C9000LC2410G C9000LC2410G 1-0(0-4095) 24
2 Linecard online C9000LC2410T C9000LC2410T 1-0(0-4095) 24
3 Linecard online C9000LC2410T C9000LC2410T 1-0(0-4095) 24
4 Linecard online C9000LC0640 C9000LC0640 1-0(0-4095) 24
5 Linecard online C9000LC0640 C9000LC0640 1-0(0-4095) 24
6 Linecard online C9000LC0640 C9000LC0640 1-0(0-4095) 24
7 Linecard online C9000LC0640 C9000LC0640 1-0(0-4095) 24
8 Linecard online C9000LC2410G C9000LC2410G 1-0(0-4095) 24
9 Linecard online C9000LC2410G C9000LC2410G 1-0(0-4095) 24
10 Linecard online C9000-RPM-2.56T C9000-RPM-2.56T 1-0(0-4095) 4
11 Linecard online C9000-RPM-2.56T C9000-RPM-2.56T 1-0(0-4095) 4
Pre-conguring a Slot for a Line-Card Type
You can pre-congure an empty line-card slot with a logical line card by using the linecard slot-id provision card-type
command. After you create the logical line card, you can congure interfaces on the line card as if it is present in the chassis. If the card
fails, the system maintains the logical conguration for the slot.
The C9010 supports the following line cards and card types:
• 6-Port 40 Gigabit Ethernet QSFP+ (card type: C9000LC0640)
• 24-Port 1/10 Gigabit Ethernet SFP+ (card type: C9000LC2410G)
• 24-Port 1/10 Gigabit Ethernet Base-T RJ-45 (card type: C9000LC2410T)
Dell(conf)# linecard 3 provision C9000LC2410G
Dell(conf)# end
Dell# show linecard 3
-- Linecard 3 --
Status : not present
Required Type : C9000LC2410G - 24-port TE/GE
High Availability (HA)
421