Reference Guide

all Enter the keyword all to enable debugging information
that includes all the logs that are related to graceful-restart.
events Enter the keyword events to enable debugging information
that includes logs that are related to generated events.
hello Enter the keyword hello to enable debugging information
that includes restart TLV related information.
states Enter the keyword states to enable debugging information
that includes state machine related information.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other
platforms,refer to the relevant Dell Networking OS Command Line Reference
Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
debug isis local-updates
To debug IS-IS local update packets, enable debugging on a specific interface and provides diagnostic
information.
C9000 Series
Syntax
debug isis local-updates [interface][vrf vrf-name]
To turn off debugging, use the no debug isis [vrf vrf—name] updates
[interface] command.
Parameters
interface (OPTIONAL) Identifies the interface type slot/port as one of
the following:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
984
Intermediate System to Intermediate System (IS-IS)