Reference Guide

Field Description
• In Layer 3 port channels, the primary port is not
indicated.
Example
Dell# sh int por 1 br
LAG Mode Status Uptime Ports
1 L2 up 00:00:08 Te 2/0 (Up) *
Te 2/1 (Down)
Te 2/2 (Up)
Dell#
Example (port-
range)
Dell#show interfaces port-channel 1-2 brief
Codes: L - LACP Port-channel
O - OpenFlow Controller Port-channel
A - Auto Port-channel
I - Internally Lagged
LAG Mode Status Uptime Ports
1 L3 down 00:00:00 Te 11/1 (Down)
Related
Commands
show lacp — displays the LACP matrix.
show port-channel-flow
Display an egress port in a given port-channel flow.
C9000 Series
Syntax
show port-channel-flow outgoing-port-channel number incoming-
interface interface {source-ip address destination-ip address}
| {source-port number destination-port number} | {src-mac
address dest-mac address {vlan vlanid | ether-type}}
Parameters
outgoing-port-
channel number
Enter the keywords outgoing-port-channel then the
number of the port channel to display flow information.
• For a Port Channel interface, enter the keywords port-
channel
then a number. The range is from 1 to 128.
incoming-
interface interface
Enter the keywords incoming-interface then the
interface type and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
gigabitethernet then the slot/port information.
Interfaces
965