Reference Guide

• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
password Enter a string up to 40 characters as the password.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information The password is listed in the configuration file; you can view the password by
entering the show running-config ftp command.
Use the ip ftp password command when you use the ftp: parameter in the
copy command.
Related
Commands
ip ftp username — sets the user name for the FTP sessions.
ip ftp source-interface
Configure an interface’s IP address as the source IP address for FTP connections.
C9000 Series
Syntax
ip ftp source-interface interface
Control and Monitoring
89