Reference Guide

rpm1 Enter the keyword rpm1 to set the RPM in slot R1 as the

primary RPM.

Default The RPM in slot R0 is the Primary RPM.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series ExaScale.

7.5.1.0 Introduced on the C-Series.

7.6.1.0 Introduced on the E-Series.

redundancy reset-counter

Reset failover counter and timestamp information displayed in the show redundancy command output.

C9000 Series

Syntax

redundancy reset-counter pe pe-id

Parameters

pe pe-id Enter the keyword pe and the port extender ID to reset the

counter. Range is from 0 to 255.

Default Not configured.

Command Modes EXEC Privilege