Reference Guide
show fip-snooping sessions
Display information on FIP-snooped sessions on all VLANs or a specified VLAN, including the ENode
interface and MAC address, the FCF interface and MAC address, VLAN ID, FCoE MAC address and FCoE
session ID number (FC-ID), worldwide node name (WWNN) and the worldwide port name (WWPN).
C9000 Series
Syntax
show fip-snooping sessions [interface vlan vlan-id]
Parameters
vlan-id Enter the vlan-id of the specified VLAN to display.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information The following describes the show fip-snooping sessions command shown in
the following example.
Field Description
ENode MAC MAC address of the ENode.
ENode Interface Slot/ port number of the interface connected to the ENode.
FCF MAC MAC address of the FCF.
FCF Interface Slot/ port number of the interface to which the FCF is
connected.
VLAN VLAN ID number the session uses.
FCoE MAC MAC address of the FCoE session the FCF assigns.
FC-ID Fibre Channel ID the FCF assigns.
Port WWPN Worldwide port name of the CNA port.
Port WWNN Worldwide node name of the CNA port.
Example
Dell# show fip-snooping sessions
Enode MAC Enode Intf FCF MAC FCF Intf VLAN
FCoE Transit
809